Home > Residential ventilation > COMPACT CRE


Heat pumps COMPACT use the thermal energy of the air for the production of domestic hot water.The process takes place in the most effective and profitable way, with C.O.P. > 3 (average).The energetic advantage of the heat pumps COMPACT, therefore, allows to safeguard the environment, usingabove all the energy of the solar radiation.
The easiness of installation, the silent and reliable functioningand the very small need of maintenance, complete the advantages of this greatly ecological and economic system.The unit COMPACT produces sanitary warm water using the wellestablished technology of the heat pumps.
The principle of functioning is the following:
1.The refrigerating fluid changes its state in the evaporator taking heat from the low temperature source (the external air)..
2. The compressor, that is the beating heart of the system, makes the energy level of the taken heat higher: in fact, the refrigerating fluid, by increasing its pressure, reaches temperatures near to 90°C.
3. In the condenser it is possible to give thermal energy to the sanitary water, warming it until 60°C. The accumulation (200, 300 litres) allows to store up and keep for a long time the heat, thanks to insulating shell in polyurethane 50 mm thick.
4. Crossing in the end the expansion element, the fluid returns to low pressure, cools down and it is available to "load" other "ecological" heat again from external air. It is also possible to employ auxiliary sources, with additional exchangers connected to boilers or solar panels
The standard unit adopts a 1.5 kW single-phase electrical resistance. The boiler is made of carbon steel, with inside treatment of two layers SMALGLASS, magnesium-anode, external coating in plastic material (ABS) RAL 9006.


Series of 3 models (standard CRE-PEL, CRE-PWW, CRE-PEP) for nominal accumulation capacity of 270 liters, composed of :
• Steel tank with double layer vetrification.
• High thickness foamed polyurethane insulation.
• External lower cover in grey ABS.
• Air-to-water heat pump system (R134a) composed of hermetic rotary compressor, condenser wrapped outside the boiler free from fouling and freon-to-water contamination, air evaporating finned coil, adjustable flow radial fan; upper cover in black ABS.
• Auxiliary electric heater automatically switched depending on outside air temperature.
• Anti-corrosion magnesium anode.
Auxiliary coil for use in combination to boiler or solar panels (CRE-PWW).
Double auxiliary coil for use in simultaneous combination to three different energy sources (CRE-PEP).
• Built-in electronics with LCD display.


Heat pumps

Packaging disposal

We invite you to always check the provisions of your Municipality regarding separate waste collection.

Wooden palletPalletsFOR 50
Corrugated cardboard boxBoxPAP 20
BagBagLDPE 4
Pallet strapStrapPP 5